Name: NanoStation Loco M5
SKU: 32784
Availability: InStock

NanoStation Loco M5

SKU: 32784

KSh14,999

NanoStation Loco M5 (LOCOM5)

The Ubiquiti NanoStation Loco M5 (often called NanoStation locoM5 or NanoLoco M5) is a compact, cost-effective outdoor wireless bridge/CPE (Customer Premises Equipment) from Ubiquiti’s airMAX series. Released around 2011 but still widely used in 2025, it’s designed for long-range point-to-point (PtP) or point-to-multipoint (PtMP) wireless links in the 5 GHz band. It’s popular for extending internet to remote buildings, surveillance setups, rural broadband, or temporary networks—thanks to its integrated high-gain antenna and reliable airMAX TDMA protocol for better performance in noisy environments.

Ubiquiti airMAX NanoStationlocoM 5 GHz Indoor / Outdoor

Key Specifications

Feature	Details
Frequency	5 GHz (5170–5875 MHz, region-dependent)
Antenna	Integrated 13 dBi dual-polarity MIMO panel
Throughput	150+ Mbps real TCP/IP (up to 300 Mbps air rate)
Range	10–15 km+ (PtP with clear line-of-sight)
TX Power	Up to 23 dBm (200 mW)
Processor/Memory	Atheros MIPS 74Kc, 400 MHz / 64 MB RAM / 8 MB Flash
Networking	1x 10/100 Ethernet port; airMAX TDMA protocol
Power	Passive PoE (24V included injector); ~8W consumption
Enclosure	Outdoor UV-stabilized plastic; IP54-like weatherproof
Dimensions/Weight	163 x 80 x 30 mm; ~180g
Software	airOS (web-based); supports UISP management
Modes	Access Point, Station, PtP Bridge, PtMP, WDS Repeater

Pros and Cons (Based on Reviews)

Pros — Extremely affordable and reliable for long-range links; easy setup with airOS; low power use; strong signal penetration; pairs well for bridges (e.g., two units for PtP); still supported by Ubiquiti firmware updates.
Cons — Older non-AC tech (slower than modern WiFi 6/AC models like Loco5AC); single Ethernet port; no Gigabit; performance drops in crowded 5 GHz areas; discontinued new stock (but widely available used/refurb).